Kill Switch and Lanyard for Kawasaki Jet Ski's

Killswitch and Lanyards fit the

 following units

440,  550, 750, 800 Kawasaki Jet Ski Kill Switch  With Safety Cord(Pro Style Lanyard, Tether)

Introduction:

If you are new to Jet Skiing or if you have had a Jet ski for years you need a Safety Lanyard and Kill Switch for your Jet ski.

The Jet ski was designed so that it would go around in circles when you fall off.  Many times this is not the case and the Jet Ski just goes straight.  There are horror stories all over talking about someone falling off and watching their ski get farther and farther away.  It is a powerless feeling and could cost you your ski or maybe even your life.

How you Fix the problem:

There is a simple solution to this and that is adding a safety lanyard and kill switch to your Jet Ski. I sell them on my website and have been helping my  customers to be more safe on the water.

When you purchase a Kill switch and Lanyard on my website you will receive the killswitch and lanyard.  Iwill also email you step by step instructions on how you can install the kill switch in 5 minutes to your existing ski.

With this kill switch your ski will turn off immediately when you fall of your ski.  In order to start it again you only need to hook up the lanyard again and start it up and off you go.

This kill switch is brand new and fits up perfectly to the on and off switch of the old machines.

Instructions will be emailed to you when the payment is received.  If you do not receive the instructions immediately after payment please contact me and I will resend.  Please check your spam filter for instructions. 

This really happens: 

Are you tired of swimming after your old Jetski after you fall off?

Have you ever watched your Jetski go 200 yards before it started to turn in circles or crash into rocks?

I finally converted my ski to use a killswitch when I fell off and my ski did not start to Circle.  My ski was headed straight on a busy saturday at a small lake close to my home.  It was about 200 yards away from me when it crossed in front of a 2010 Mastercraft Ski Boat.  Thank goodness no one was hurt but it ripped my hull in 2 pieces and put a big hole in the bow of the Mastercraft.  Thank goodness I had insurance because the damage to the Ski Boat was 14k. 

What happened to me:

Please see what is left of my hull after I removed the engine.  I could never find the hand pole or handle bars. 

The next set of photos are from my Friends Custom750 that went straight over some rocks when the trottle stuck and did not shut off.

If you have experienced any of the previous things you need a Kawasaki Kill Switch!  And if you haven't gone through this you need a Killswitch.

- The Kill Switch will work on the following Kawasaki Stand Up models js300, js440, js550, js750 and sx-r 800. 

- The Kill Switch does not work on the Kawasaki JS650.  If you need a Kawasaki Kill switch for your 650 or your X2 please contact me and we can get it worked out.

 Step by step photo instructions will be emailed upon payment.

If you have any questions please let me know.

Dallin.wood@gmail.com

Thanks for looking.

Product Photos:

The Lanyards are HIGH QUALITY pro style Lanyards with neoprene wrist band.  Don't settle for the cheap ones as they tend to break after a few uses. 

 We ship next Business day and you should receive your kill switch and lanyard within 2-3 days average.

Jet Ski Kill Switch Home